| Doc. No: KKM/GWI/23 | Tool/Die Re-Maintenance Work Instruction |
| Rev. No.: 01 | |
| Rev. Date:01.03.2012 |
- Found any dimension is wear out then forward to Tool Room department.
- Do Welding according to drawing parameters.
- Do grinding and Polishing after welding. then prepare inspection report and forward to Production department.
- After targeted production, if found oversize (0.5 to 1.0mm) do facing (5 mm) then prepare as per drawing parameter.
- After modification prepare a plaster mold and do inspection and fill inspection report if Found ok then issue to production department.